CPX-20

CPX-20

Category: Concrete Primer Usage:
  • Recommended for 2 Component Cold Plastic Road Marking on Concrete Surface
Application:
  • Mix Part A and Part B for 3-4 minutes with continuous stirring
  • Apply primer by roller/ brush/ squeeze/ spray
  • Allow it to dry completely, then only apply cold plastic
  • Do not dilute with any solvent, CPX-20 is supplied in ready to use viscosity Cleaning of equipment can be done with any solvents
  • Drying time @ 25' C- 60 min.
  • Appearance- Epoxy resin(Part A): Clear liquid, Hardener(Part B): Brown liquid
  • Consumption -2.5-3.5 m'/ Kg, depending on surface